Speedhut Edge Attitude Pillar, Pod, and Mount User Manual

Browse online or download User Manual for For the car Speedhut Edge Attitude Pillar, Pod, and Mount. Speedhut Edge Attitude Pillar, Pod, and Mount User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460
Installation Instructions: Pillars and Pods with Edge Attitude Mount
Models #13008, #13009 are designed to fit 98-02 Dodge Ram (Velcro and rachet fasteners)
STEP ONE: Remove the stock A-pillar
STEP TWO: For models with the Infinity speaker, remove speaker from A-pillar. Cut or grind down the raised speaker hole on the stock A-pillar to allow
the mounting of the new A-pillar mount.
STEP THREE: Hold the A-pillar mount in position on the factory A-pillar. Slight trimming of the A-pillar mount may be required for a perfect fit in some
applications. Drill 3/16” holes through the 4 corners of both the mount and factory A-pillar.
STEP FOUR: Attach the two pieces of Velcro together. Peel back from one side and attach to the recessed area of the mount where the Attitude fits.
STEP FIVE: Install Attitude in pod, press firmly to engage adhesive to back of Display (don’t press on LCD).
STEP SIX: The mount has clearance for the Attitude wires to be run down the back and through the bottom. Secure wiring to the back of the new mount.
STEP SEVEN: Insert ratchet fasteners through holes to attach mount to factory A-pillar.
STEP EIGHT: Re-install mount/factory A-pillar assembly, making sure wires are not pinched.
Model #13005 is designed to fit 2003+ Dodge Ram (velcro and long bolt)
STEP ONE: Attach the two Velcro pieces together. Peel back strip from one side and attach to the recessed area of the mount where the Attitude fits.
STEP TWO: Install Attitude in pod, press firmly to engage adhesive to back of Display.
-Do not press on LCD
STEP THREE: Run wires between mount and the stock A-pillar. There is a visible channel molded in for the wire.
STEP FOUR: Remove the lower cap and screw from the stock A-pillar handle.
STEP FIVE: Place mount over the stock A-pillar.
STEP SIX: Use provided (longer) screw to secure mount and A-pillar.
STEP ONE: Attach the two Velcro pieces together. Peel back strip to expose adhesive from one side and attach to the recessed area of the mount where
the Attitude fits.
STEP TWO: Expose adhesive and install Attitude in mount. Press firmly to engage adhesive to back of Display (Do not press on LCD).
STEP THREE: Remove Handle from A-pillar (8mm bolts).
STEP FOUR: Run wires between mount and pillar (extra space has been provided for wires).
STEP FIVE: Place mount on pillar.
STEP SIX: Reinstall handle (The handle will catch the top edge of mount, holding it in place).
Model #13001 is designed to fit Ford SD 03-06 (velcro)
Model #13000 is designed to fit Ford SD 99-02 (velcro and ratchet fasteners)
Model #13012 and 13013 are designed Chevy 07+ (velcro and screw)
Installation Instructions: 03-06 Ford Super Duty
Installation Instructions: 98-02 Dodge Ram
Installation Instructions: 03+ Dodge Ram
STEP ONE: Attach the two Velcro pieces together. Peel back strip to expose adhesive from one side and attach to the recessed area of the mount
where the Attitude fits.
STEP TWO: Expose adhesive and install Attitude in mount. Press firmly to engage adhesive to back of Display (Do not press on LCD).
STEP THREE: Run wires between mount and pillar (extra space has been provided for wires).
STEP FOUR: Place mount on A-pillar in final position.
STEP FIVE: Along the top of the mount, drill a 5⁄32” hole through the mount and A-pillar.
STEP SIX: Press in Ratchet Fasteners.
STEP ONE: Remove stock pillar (screw is located under the cap at the top of the pillar).
STEP TWO: Attach the two pieces of Velcro, peel one side and attach to recessed pocket area of the Attitude mount.
STEP THREE: Install Attitude in pillar, press firmly to engage adhesive to back of display (do not press on LCD).
STEP FOUR: Use provided screw to hold pillar in place: (Don’y over tighten screw, Snug Only)
Your new A-pillar mount installs over the factory A-pillar. It is not a replacement.
Installation Instructions: 99-02 Ford Super Duty
Installation Instructions: 07+ Chevy/GMC
Page view 0
1 2

Summary of Contents

Page 1

www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460Installation Instructions: Pillars a

Page 2

www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460www.Speedhut.com Need help? Contact

Comments to this Manuals

No comments